RNA, or ribonucleic acid, is present in the cells of all living beings and required to synthesize proteins. A research team at the University of California, Riverside, has discovered the structure of a novel RNA-modifying enzyme, ZCCHC4, and identified the mechanism that controls how this e ... more
A better way to control crystal vibrations
The vibrational motion of an atom in a crystal propagates to neighboring atoms, which leads to wavelike propagation of the vibrations throughout the crystal. The way in which these natural vibrations travel through the crystalline structure determine fundamental properties of the material. For example, these vibrations determine how well heat and electrons can traverse the material, and how the material interacts with light.
Now, researchers have shown that by swapping out just a small fraction of a material's atoms with atoms of a different element, they can control the speed and frequencies of these vibrations. This demonstration provides a potentially simpler and cheaper way to tune a material's properties, allowing for a wide range of new and more efficient devices, such as in solid-state lighting and electronics.
The natural vibrations of a crystalline material travel as particles called phonons. These phonons carry heat, scatter electrons, and affect electrons' interactions with light. Previously, researchers controlled phonons by dividing the material into smaller pieces whose boundaries can scatter the phonons, limiting their movement. More recently, researchers have engineered nanoscale structures, such as nanowires, into the material to manipulate phonons' speed and frequencies.
A team of researchers from the University of California, Riverside and the University of California, San Diego has now found that by doping -- introducing different elements into the material -- you can control phonons. The researchers doped aluminum oxide with neodymium, which replaces some of the aluminum atoms. Because neodymium is larger and more massive than aluminum, it alters the vibrational properties of the material, changing how phonons can travel.
"It introduces distortion to the lattice, which persists over a large distance compared to the atomic size, and affects the whole vibrational spectrum," said Alexander Balandin of the University of California, Riverside.
Using a new method of producing evenly doped crystals and new sensitive instruments to measure the phonon spectrum, the researchers showed, for the first time, that even a small number of certain dopants can have a big impact. "This approach provides a new way of tuning the vibrational spectrum of materials," Balandin said.
Previously, researchers assumed that any significant effect on phonons would require a very high concentration of dopants. But, the team found that doped aluminum oxide with a neodymium density of only 0.1 percent was enough to lower the phonon frequency by a few gigahertz and the speed by 600 meters per second.
Boosting phonon speeds increases a material's thermal conductivity, allowing tiny transistors to cool faster. Slowing phonons, on the other hand, would be useful in making more efficient thermoelectric devices, which convert electricity into heat and vice versa. Furthermore, in optical devices such as light-emitting diodes, slowing phonons and suppressing phonon interactions with electrons would mean more energy is used to produce photons (light) and less is lost as heat.
The researchers are now applying their strategy to other dopants and materials, such as gallium arsenide, with an eye toward developing energy-efficient devices, Balandin said.
Fariborz Kargar and Elias H. Penilla and Ece Aytan and Jacob S. Lewis and Javier E. Garay and Alexander A. Balandin; "Acoustic phonon spectrum engineering in bulk crystals via incorporation of dopant atoms"; Appl. Phys. Lett.; 2018
- thermal conductivity
- light emitting diodes
- gallium arsenide
In "Avengers: Endgame," Tony Stark warned Scott Lang that sending him into the quantum realm and bringing him back would be a "billion-to-one cosmic fluke." In reality, shrinking a light beam to a nanometer-sized point to spy on quantum-scale light-matter interactions and retrieving the inf ... more
What if a single musical note could mean the difference between life and death? A new sensor based on a 3,000 year old African musical instrument can be used to identify substances, including a poisonous chemical sometimes mistakenly added to medicines. The mbira sensor, which can be constr ... more
Researchers at University of California San Diego School of Medicine report that detection of "copy editing" by a stem cell enzyme called ADAR1, which is active in more than 20 tumor types, may provide a kind of molecular radar for early detection of malignancies and represent a new therape ... more
By stacking and connecting layers of stretchable circuits on top of one another, engineers have developed an approach to build soft, pliable "3D stretchable electronics" that can pack a lot of functions while staying thin and small in size. As a proof of concept, a team led by the Universit ... more
By doping alumina crystals with neodymium ions, engineers at the University of California San Diego have developed a new laser material that is capable of emitting ultra-short, high-power pulses--a combination that could potentially yield smaller, more powerful lasers with superior thermal ... more
A team of mechanical engineers at the University of California San Diego has successfully used acoustic waves to move fluids through small channels at the nanoscale. The breakthrough is a first step toward the manufacturing of small, portable devices that could be used for drug discovery an ... more
Many industrial buildings, including nuclear power plants and chemical plants, rely on ultrasound instruments that continually monitor the structural integrity of their systems without damaging or altering their features. One new technique draws on laser technology and candle soot to genera ... more
Monitoring and tracking biological threats or epidemics require the ability to carry out medical and laboratory tests in the field during a disaster or other austere situations. Expensive laboratory equipment is often unavailable in these settings, so inexpensive point-of-care technology is ... more
As a solution evaporates, the dissolved chemicals concentrate until they begin forming a crystal through a process called nucleation. Industries that use small crystals in pharmaceuticals, food and microelectronics are seeking to understanding this nucleation event. Scientists studying nucl ... more
- 1analytica 2020: The leading guide to the smart laboratory
- 2Using Gene Scissors to Detect Diseases
- 3Sartorius signs agreement to acquire select Danaher Life Science platform businesses
- 4First molecular movies at European XFEL
- 5Predicting a protein's behavior from its appearance
- 6Novel sensor implant radically improves significance of NMR brain scans
- 7Scientists design built-in controls for mini-chemical labs on a chip
- 8Swiss Army Knife for Genome Research
- 9Novel mathematical framework provides a deeper understanding of how drugs interact
- 10Biologists examine sperm quality on the basis of their metabolism
- Separating Drugs with MagLev
- Fast and cheap low-tech method to test for the presence of any DNA sequence
- Scientists design built-in controls for mini-chemical labs on a chip
- Better biosensor technology created for stem cells
- Scientists crack structure of a novel enzyme linked to cell growth and cancer