Wetting is an everyday phenomenon that represents how well liquid spreads on a surface. When water comes into contact with an extremely water-repellent, or 'superhydrophobic' surface, droplets bead up and roll off easily. Aalto University researchers have developed a measurement technique c ... more
Tailor-made carbon helps pinpoint hereditary diseases and correct medication dosageNew method expands knowledge of carbon-based materials
The new methodology allows the experimental spectrum produced by X-ray spectroscopy to be separated into atomic-level data.
Sensors manufactured with carbon-based materials can provide uniquely accurate and real-time information on hereditary diseases or the concentrations of drugs in the body. In addition to medicine, carbonaceous materials are used in batteries, solar cells and water purification.
Other elements, such as hydrogen and oxygen, are almost always present in carbon-based materials, which alters the materials' properties. Therefore, modifying materials for desired applications requires atomic-level knowledge on carbon surface structures and their chemistry. Researchers at Aalto University, the University of Cambridge, the University of Oxford and Stanford University have now taken a significant new step forward in describing the atomic nature of carbonaceous materials.
Detailed information on carbon surfaces can be obtained by X-ray spectroscopy, but the spectrum it produces is challenging to interpret because it summarises information from several local chemical environments of the surface. The researchers have developed a new systematic analysis method that uses machine learning to integrate the computational model (density functional theory) with the experimental results of the carbon sample. The new methodology allows the experimental spectrum produced by X-ray spectroscopy to be separated into atomic-level data.
'In the past, experimental results have been interpreted differently, based on varying literature references, but now we were able to analyse the results using only computational references. The new method gives us a much better understanding of carbon surface chemistry without human-induced bias' says Anja Aarva, a doctoral student at Aalto University.
The new method expands knowledge of carbon-based materials
In a two-part study, the researchers initially studied how differently bound carbon affects the formation of the experimental spectrum qualitatively. The researchers then attempted to aggregate the measured spectrum with computational spectrum reference data to obtain a quantitative estimate of what the experimental spectrum consists of. This was to help them determine what the nature of the carbon sample at the atomic-level is. The new methodology is suitable for analysing the surface chemistry of various forms of carbon, such as graphene, diamond and amorphous carbon.
The study is a continuation of the work of Aalto University postdoctoral researcher Miguel Caro and professor Volker Deringer from Oxford University, which extensively mapped the structure and reactivity of amorphous carbon. The study utilises machine learning methods developed by professor Volker Deringer and professor Gabor Csányi from Cambridge University. Experimental measurements were carried out by Sami Sainio, an Aalto based postdoctoral researcher at Stanford University.
'Next, we intend to use the methodology we have developed to predict, for example, what kind of carbon surface would be best for electrochemical identification of certain neurotransmitters, and then try to produce the desired surface. In this way, computational work would guide experimental work and not vice versa, as has typically been the case in the past,' Tomi Laurila, professor at Aalto University said.
Anja Aarva et al.; "Understanding X-ray Spectroscopy of Carbonaceous Materials by Combining Experiments, Density Functional Theory, and Machine Learning. Part I: Fingerprint Spectra"; Chemistry of Materials; 2019
Anja Aarva et al.; "Understanding X-ray Spectroscopy of Carbonaceous Materials by Combining Experiments, Density Functional Theory, and Machine Learning. Part II: Quantitative Fitting of Spectra"; Chemistry of Materials; 2019
- x-ray spectroscopy
Agreeing on a unified testing method is needed to allow community-wide comparison between published results. This would significantly progress development of superhydrophobic materials and their transfer to commercial products in, for instance, self-cleaning and anti-icing applications. Cur ... more
- 1analytica 2020: The leading guide to the smart laboratory
- 2Using Gene Scissors to Detect Diseases
- 3Sartorius signs agreement to acquire select Danaher Life Science platform businesses
- 4First molecular movies at European XFEL
- 5Novel sensor implant radically improves significance of NMR brain scans
- 6Predicting a protein's behavior from its appearance
- 7Swiss Army Knife for Genome Research
- 8Scientists design built-in controls for mini-chemical labs on a chip
- 9Novel mathematical framework provides a deeper understanding of how drugs interact
- 10Biologists examine sperm quality on the basis of their metabolism
- Tailor-made carbon helps pinpoint hereditary diseases and correct medication dosage
- Innovative sensing technique could improve greenhouse gas analysis
- High-resolution imaging of nanoparticle surface structures is now possible
- New CEO at Specim Spectral Imaging
- Inspectors find phthalates in toys and asbestos in second-hand products