The development of hybrid materials is an emerging field in materials science. As the researcher explained, the interest in these materials stems from "the success in combining that stability of inorganic components with the versatility of organic components. Blending them causes the proper ... more
New depths in infrared nanospectroscopy
Subsurface chemical nanoidentification by nano-FTIR spectroscopy
Researchers from the Nanooptics Group at CIC nanoGUNE (San Sebastian) demonstrate that nanoscale infrared imaging - which is established as a surface-sensitive technique - can be employed for chemical nanoidentification of materials that are located up to 100 nm below the surface. The results further show that the infrared signatures of thin surface layers differ from that of subsurface layers of the same material, which can be exploited to distinguish the two cases. The findings, recently published in Nature Communications, push the technique one important step further to quantitative chemometrics at the nanoscale in three dimensions.
Optical spectroscopy with infrared light, such as Fourier transform infrared (FTIR) spectroscopy, allows for chemical identification of organic and inorganic materials. The smallest objects which can be distinguished with conventional FTIR microscopes have sizes on the micrometre-scale. Scientists at CIC nanoGUNE (San Sebastian), however, employed nano-FTIR to resolve objects, which can be as small as a few nanometres.
In nano-FTIR (which is based on near-field optical microscopy), infrared light is scattered at a sharp metallized tip of a scanning-probe microscope. The tip is scanned across the surface of a sample of interest and the spectra of scattered light are recorded using Fourier transform detection principles. Recording of the tip-scattered light yields the sample's infrared spectral properties and thus the chemical composition of an area located directly below the tip apex. Because the tip is scanned across the sample surface, nano-FTIR is typically considered to be a surface-characterization technique.
Importantly though, the infrared light that is nano-focussed by the tip does not only probe a nanometric area below the tip, but in fact probes a nanometric volume below the tip. Now the researchers at CIC nanoGUNE showed that spectral signatures of materials located below the sample surface can be detected and chemically identified up to a depth of 100 nm. Furthermore, the researchers showed that nano-FTIR signals from thin surface layers differ from that of subsurface layers of the same material, which can be exploited for determination of the materials distribution within the sample. Remarkably, surface layers and subsurface layers can be distinguished directly from experimental data without involving time-consuming modelling.
In her PhD thesis, Silvia Larumbe-Abuin has developed nanostructures that assist in the process to decontaminate water. The nanostructures are coated in titanium oxide to which nitrogen has been added. This allows sunlight, rather than ultraviolet radiation, to trigger the process involving ... more
Ikerlan-IK4 and Mondragón Unibertsitatea are taking part in a project initiated by the Spanish National Research Council, CSIC, and which has developed a microchip capable of separating and extracting tumour cells in the blood stream by means of ultrasonic waves. The Foundation General Hosp ... more
- 1New NMR method enables monitoring of chemical reactions in metal containers
- 2Deep learning enables early detection and classification of live bacteria using holography
- 3analytica 2020: Great exhibitor resonance for the autumnal fair
- 4Merck acquires a French company
- 5Formation of quadruple helix DNA tracked in live human cells for the first time
- 6Thermo Fisher Scientific and QIAGEN N.V. Agree on Amended Terms to Acquisition Agreement
- 7Hurdle of microscopy overcome
- 8Biofilms - an invisible threat to food safety
- 9How smart, ultrathin nanosheets go fishing for proteins
- 10Engineers use electricity to clean up toxic water