Monitoring and tracking biological threats or epidemics require the ability to carry out medical and laboratory tests in the field during a disaster or other austere situations. Expensive laboratory equipment is often unavailable in these settings, so inexpensive point-of-care technology is ... more
Laser-based ultrasound approach provides new direction for nondestructive testing
Many industrial buildings rely on ultrasound instruments that continually monitor the structural integrity of their systems without damaging or altering their features. One new technique draws on laser technology and candle soot to generate effective ultrasonic waves for nondestructive testing and evaluation. Researchers are using ultrasonic nondestructive testing that involves amplifying the signal from a photoacoustic laser source using laser-absorbing patch made from an array of nanoparticles from candle soot and polydimethylsiloxane. This image shows the fabrication process of patterned candle soot (CS) nanoparticle (NP) polydimethylsiloxane (PDMS) patch.
Many industrial buildings, including nuclear power plants and chemical plants, rely on ultrasound instruments that continually monitor the structural integrity of their systems without damaging or altering their features. One new technique draws on laser technology and candle soot to generate effective ultrasonic waves for nondestructive testing and evaluation.
A team of researchers is using ultrasonic nondestructive testing (NDT) that involves amplifying the signal from a photoacoustic laser source using laser-absorbing patch made from an array of nanoparticles from candle soot and polydimethylsiloxane.
The approach marks one of the first NDT systems that combines elements of contact and noncontact ultrasound testing. The results of generating such ultrasonic waves with the photoacoustic patch demonstrate the promise of the broad range of noncontact applications for NDT.
"Laser-based NDT method has advantages of temperature-independent measurement and wide range of monitoring area by easily changing the position of devices," said Taeyang Kim, an author on the paper. "This technique provides a very flexible and simple method for noncontact and remote generation of ultrasonic surface waves."
Ultrasound waves can be made when a high-powered laser strikes a surface. The heat produced by the pulses induces a pattern of expansion and compression on the illuminated area, yielding an ultrasonic signal. The waves produced, called Lamb waves, then travel through material as an elastic wave.
The group used the candle soot nanoparticles paired with polydimethylsiloxane to absorb the laser. They turned to candle soot because it is readily available and efficient at absorbing lasers and can produce the elastic expansion needed to make the photoacoustic conversion that generates the Lamb wave.
By placing the particle in the patch in a line array, they were able to narrow the bandwidth of the waves, filtering out unwanted wave signals and increasing analytical accuracy. The researchers opted for an aluminum sensing system for the receiving transducer.
The patch increased the amplitude by more than twofold over conditions without the patch and confirmed it produced narrower bandwidth than other conditions.
Kim said the question of how the approach's durability in an industrial setting remains, as well as how well the patches perform on curved and rough surfaces.
"New NDT systems will attract more attention to explore the optimal materials for the patch or various applications for NDT industries," he said.
Next, the team looks to test the system in high-temperature nondestructive testing scenarios.
- nondestructive analysis
As a solution evaporates, the dissolved chemicals concentrate until they begin forming a crystal through a process called nucleation. Industries that use small crystals in pharmaceuticals, food and microelectronics are seeking to understanding this nucleation event. Scientists studying nucl ... more
Metallic glasses -- alloys lacking the crystalline structure normally found in metals -- are an exciting research target for tantalizing applications, including artificial joints and other medical implant devices. However, the difficulties associated with predicting how much energy these ma ... more
- 1analytica 2020: The leading guide to the smart laboratory
- 2Using Gene Scissors to Detect Diseases
- 3Sartorius signs agreement to acquire select Danaher Life Science platform businesses
- 4First molecular movies at European XFEL
- 5Predicting a protein's behavior from its appearance
- 6Novel sensor implant radically improves significance of NMR brain scans
- 7Swiss Army Knife for Genome Research
- 8Scientists design built-in controls for mini-chemical labs on a chip
- 9Novel mathematical framework provides a deeper understanding of how drugs interact
- 10Biologists examine sperm quality on the basis of their metabolism
- Separating Drugs with MagLev
- Fast and cheap low-tech method to test for the presence of any DNA sequence
- Scientists design built-in controls for mini-chemical labs on a chip
- Better biosensor technology created for stem cells
- Scientists crack structure of a novel enzyme linked to cell growth and cancer