Test formulations under original storage & usage temperatures, regardless of whether they are sold in cold, temperate or hot climates more
Materials Testing According to ISO 4624, DIN EN 15870 and More
Principles of Operation
The LUMiFrac® is an innovative adhesion analyser, which employs centrifugal forces to stress multiple samples at once. It provides adhesive and tensile strength as an absolute physical quantity in N/mm².
The LUMiFrac accomplishes this by directly applying an incrementally increasing radial centrifugal force to the specimen being tested. It determines with high resolution the RPM at the moment of fracturing.
All data is transmitted to the wellknown and popular operating software SEPView, which automatically calculates and displays the critical force/strength of failure in real time. Furthermore, it allows to analyze, compare & calculate statistics and combine results for up to tens of samples. Related data, as figures of fracture pattern, may be taken into account as well.
Test sample positioning is as simple as 1-2-3. No clamping or special precautions are needed. Just slide up to 8 samples into marked rotor locations and you are ready to go. The unique multisample approach of testing 8 samples simultaneously results in an unparalleled accuracy and reduces measuring time by 85%. Combine everything you have just read, put it into action, and it makes for not exceptionally accurate and reproducible data, but also for an exceptionally happy user. LUMiFrac – the standard in adhesion & cohesion testing.
The Adhesion Analyser LUMiFrac is the new benchmark for determining adhesive and tensile strengths (winner of the Berlin-Brandenburg 2012 Innovation Award).
Starting as an idea for an easier and timesaving determination of adhesive properties, the multipatented new adhesion testing technology now revolutionizes the analysis of your composite materials and bonded parts.
You can even work with multi-layered films; having an immense variety of applications.
The LUMiFrac is a research and QC tool for the adhesive formulation and surface treatment industry; lacquer coatings, joint wood products, composite materials in automotive and aircraft industries, adhesive tapes,
multilayer foils for packaging or thin metal films on plastics and optical substrates, e.g., eyeglasses, mirrors, and many more.
Different test stamps are available to cover more than enough material combinations and to enable a wide range of applied loads. In order to facilitate sample preparation specially designed tools are available.
The LUMiFrac comes certified, factory precalibrated and is ready-to-go.
- Easy preparation of your test specimen
- Up to 8 samples are analysed under identical conditions
- No sample clamping at all - simply insert and start
- Variable testing speeds
- Flexible load cycling
- Wide range of test forces (0.1 N up to 6.5 kN)
- Testing under various temperatures
- Cost-saving multi-use of test stamps
- Meets ISO 4624 and DIN EN 15870
material testing equipment
The volume concentration can be calculated even for polydisperse samples without knowing the refractive index more
Particle size distribution and concentration of nano- and microparticles in suspensions and emulsions; from below 100 nm to a few micrometers. more
The new generation of the proven stability analyzer LUMiFuge® considerably simplifies quality control in industry by introducing the instability index in the SEPView® 6 software. The LUMiFuge, which uses the measuring principle of analytical centrifugation, is one of the standard devices fo ... more
The multi-wavelength LUMiSizer complements the near-infrared (NIR) LUMiSizer. An additional, blue light source enables particle characterization in the lower nanometer range. Shorter wavelengths increase the sensitivity for translucent & low-concentrated dispersions. The analytical photocen ... more
LUM GmbH is a leading international provider of innovative measurement technology for dispersion analysis and materials testing. Since the founding of the company by Prof. Dr. Dr. D. Lerche in 1994, LUM is also obliged to science. The company promotes science and technology and contributes ... more
From 22-23 May 2019 LUM GmbH hosts the 9th International Conference Dispersion Analysis & Materials Testing in Berlin, Germany. Since 2014 the Young Scientist Award (YSA) recognizes outstanding scientific work by young researchers in the areas of particle and dispersion characterization and ... more
The 8th International Conference Dispersion Analysis & Materials Testing is hosted by LUM GmbH in Berlin, Germany, from 29-30 January 2018. Here, during this now traditional interdisciplinary event, particle scientists meet product formulators; application engineers meet scholars from extre ... more
- 1Efficient & Inexpensive Microscope for Checking Cell Cultures
- 2Microspectrometer as Small as Your Fingertip
- 3Flexible and Modular: The Complete FPLC Solution for All Types of Protein Purification
- 4The Versatile Particle and Dispersion Analyser: At-Line, in the Process and in the Laboratory
- 5SPECORD PLUS: The New Generation of Double-Beam Photometers from Analytik Jena
- 6Switch from Ergonomically Exhausting Manual Work to the Fully Automatic Processing of Your Tubes
- 7Lab nutsche filter dryers for efficient product development and direct scale up, with the GFD® range
- 8Accelerated Solvent Extraction (ASE) – Maximize results and reduce errors in food analysis!
- 9Fast GC! Super-charging GC´s World-wide!
- 10BRAVO – The new handheld Raman spectrometer from Bruker