There are a relatively large number of studies on the accumulation and transport of persistent organic pollutants by microplastics, which has resulted in good data in this regard. Data, however, on the accumulation of metals that are toxic to the environment are very rare and sometimes scie ... more
Unravelled with innovative experiments: Why tiny metallic structures are extremely strong
Successful Mechanical Testing of Nanowires
Light-weight and simultaneously strong – porous metallic nanomaterials promise interesting applications as, for instance, for future aeroplanes with enhanced reliability and for energy-efficient automobiles. The origin of the exceptional properties of the tiny metallic bodies remains to be understood in detail. Using innovative experimental approaches, researchers at Helmholtz-Zentrum Geesthacht (HZG) and Hamburg University of Technology (TUHH) have found what makes the nanostructures so strong. The results could promote the development of future novel lightweight materials.
The metal wires under study are extremely small: Their diameters are just twenty nanometres (millionths of a millimetre). The tiny structures demonstrate fascinating properties, and in particular they are extremely strong. "In principle these nanowires can be thousandfold stronger than millimetre-sized metal bodies" says project leader, Prof. Jörg Weißmüller. The scientist leads the Institute for Material Physics and Material Engineering at the TUHH as well as the "Hybrid Material Systems" group at HZG’s Institute for Materials Research. "This makes them very interesting for future applications." For instance, lighter and therefore more energy-efficient automobiles built from such high-tech materials could be envisaged.
The detail of how the nanostructures behave is not yet very accurately known in the scientific community. Most insight on mechanisms comes from computer simulations. Here, the experts assemble dozens of atoms into small, virtual metal particles with which they then carry out real experiments in supercomputers. These computer experiments yield exciting and plausible results. However, experimental verification is often missing. The reason: It is extremely hard to characterize the mechanical properties of nanoparticles. The classic material research testing machines are poorly adopted to the task – they are massive presses with braces that can be as thick as thighs.
Weißmüller and his colleagues succeeded in developing a clever experimental set up – a mechanical test procedure for nanowires. The trick: They combine billions of gold nanowires into a porous, sponge-like network consisting of one quarter metal and three quarters air. Millimetre-sized test cylinders can be produced from this nanoporous gold – large enough for a conventional testing machine: A punch presses on the cylinder, and in the process all the nanowires are simultaneously deformed. The experts can subsequently deduce the behaviour of the individual wires. In addition, the test piece is immersed in an acid solution acting as an electrolyte and an electrical voltage can be applied. Thereby the researchers can systematically manipulate the surface phenomena which are quintessential for the nano-cosmos. In some instances, surface contributions can even be repeatedly switched between “on” and “off”.
"In one case, with our experiments we were able for the first time to confirm the results of the computer simulations", says Weißmüller. "In another case we were able to show that it is quite different to what was originally thought." In their article in "Nano Letters" the researchers were able to prove that, as suspected, it is the forces on the surfaces of the nanoparticles which lead to the enormous strength. The reason: In a large macroscopic body the vast majority of atoms are inside the crystal, only a fraction is found on the surface. With nanoparticles, by contrast, a large fraction of the atoms sit in the surface. As a result, the surface effects are decisive for the mechanical behaviour. The HZG researchers were now able to demonstrate this by weakening and even switching off certain surface effects in their experiments.
In their current publication in "Nature Communications", the specialists succeeded in shedding light more closely on the nature of the surface effects and determining the influence of two different phenomena. "We had a surprize here", said Weißmüller's colleague, Dr. Nadiia Mameka. "Our results have disproved the interpretation of previous computer experiments." As it runs out, it is not--as assumed--the force acting between the surface atoms which determines the mechanical properties of the nanoparticles. "Instead it is likely to be the energy in the surface which is responsible for the strength“, explained Mameka. "This is new and had not been expected."
In the future, such knowledge could help in the development of innovative materials based on nanotechnology – highly interesting, perhaps, for lightweight construction but also for materials with built-in sensor properties. "Due to the fact that we better understand the fundamental properties of these nanowires" emphasized Jörg Weißmüller, "we are better able to target the development of future materials."
- material science
A new membrane developed at the Helmholtz-Zentrum Geesthacht (HZG) separates small dye particles or drug substances not only by size but also by their electrical charge. This additional function enables organic molecules with lateral dimensions of one to two nanometres to be such high-effic ... more
Intensive research into new processes and materials is carried out in the transport industry and in aircraft manufacturing with the objective of reducing the weights of vehicles and airplanes. The trend in these areas is towards the use of polymer-metal hybrid structures so-called multi-mat ... more
An X-ray study carried out at DESY allows to improve the quality of chocolate. The study offers new insights into the formation of fat bloom, an unwelcome white layer that occasionally forms on chocolate. "Although fat blooming is perfectly harmless, it causes millions in damage to the food ... more
Two novel testing facilities for materials research will be provided to the Technical University of Braunschweig and Hamburg University of Technology by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation). For the first time in a university environment, these two major ins ... more
- 1Miniaturized Lab-on-a-Chip for real-time Chemical Analysis of Liquids
- 2Organic thin-film sensors for light-source analysis and anti-counterfeiting applications
- 3A new era of early cancer detection with blood test may change cancer screening paradigms
- 4Beckman Coulter Life Sciences acquires Dublin biotech start-up
- 5Less risk, less costs: Portable spectroscopy devices could soon become real
- 6Mobile phone app accurately detects COVID-19 infection in people’s voices with the help of artificial intelligence
- 7Show me your brain scan and I'll tell you how old you really are
- 8Sensing pressure using paper
- 9The predictive power of blood: metabolomic profiling reveals risk of multiple diseases all at once
- 10Pharmacoscopy: Next-Generation Microscopy
- Revealing the Genome of the Common Ancestor of All Mammals
- Structure of wheat immune protein resolved
- Digital lab management: Fully connected
- The predictive power of blood: metabolomic profiling reveals risk of multiple diseases all at once
- Show me your brain scan and I'll tell you how old you really are