Product Gallery

Print version | PDF version | Recommend product | RSS-Feed

ML 500 Control Software with unlimited method of storage: Realize the full potential of your ML500 dispenser

Simple Method Programming
Method wizards are provided to quickly write aliquot dispense, serial dispense and dilution methods. Create custom wizards by assigning variables to the volume, speed and delay fields. An Emulation mode is provided to program and test methods while the instrument is in use or disconnected.

Additional Pump Capabilities
Increase the programmable resolution of an ML500 from 0.1% to 0.05% of the full syringe volume. Loop the entire method or a single element continuously or a specified number of times. Use the dispense counter to track tube or well numbers during repetitive dispenses. Integrate the ML500 into an automated system using a delay or a digital start signal that cen be sent and received from third party devices trough the TTL port.

Expandable Liquid Handling
The software is capable of running the ML510, ML530, ML540, ML560 and the serial MVP(modular valve positioner). Daisy chain uo to 16 instruments to acompish a series of tasks within a method. Simultaneously run independent methods by attaching the units to different serial ports. Over 20 different valve configurations are supported when using the ML560 and an MVP.

Operating System and Computer Requirements
The software is designed for computers running Microsoft Windows service pack 2. The computer must have an existing or emulated serial port connector for proper communication with the ML500 or MVP.